SKS Trigger - disassembly

Parts diagram for reference.

Complete trigger assembly.

Depress the mag cover latch (35) and remove the latch stop pin (38) This will allow you to remove the mag cover latch (35), latch / sear spring (36), and sear (37).

Compress the hammer spring ( 54) by hand, this will take some effort, and lift out the hammer (51) and hammer strut (53) as a unit.

Raise the disconnector (49) and remove the rebound disconnector (50) by squeezing it together to seperate it from the trigger guard (39) and lifting it out. The bullet is just to hold the disconnector up for the photo.

Remove the disconnector hinge pin (40) and lift out the disconnector (49).

Remove the trigger pin (41) and lift out the trigger (44), trigger bar (46), and safety catch spring.

Remove the trigger bar pin (47) to seperate the trigger (44), trigger bar (46), and safety catch spring.

Finally, remove the safety catch pin (45) and remove the safety catch (42).

on to Trigger - improvement

SKS Index